Friday, June 18, 2010

How To Make Homemade Rat Toys

Projects

ADHESIVES

Material
drawings or pictures from magazines
transparent adhesive paper adhesive tape


Tools
scissors

Running
Cut roughly a drawing or picture that you like , leaving a border around it will be removed later. Cut a piece of adhesive tape and paste this over the image. If the tape is too tight and does not cover the entire back of the picture, cut other pieces of double sided tape and glue them back up to cover the entire back of the image. Cut a piece of grossly
transparent adhesive (found in hardware stores) and glue it over the image, smoothing it well with your fingertips by moving from the center out, not to leave air bubbles. Now crop the image to the wire. Will remain a sticker that will be using the shell simply by removing the image from behind the protection of the remaining adhesive.


Only Secret tip for anyone attending the party.

paper butterflies

Material
newspaper (the parts with the words)
white paper (okay any solid color) eye shadow
expired
glue

Tools
scissors

brush a bit 'of water

Execution
Melt a bit 'of powder eyeshadow in a couple of drops of water and stir with the brush, until the color becomes uniform. Go with a brush the color obtained in the paper, with only the parts written, and let dry.
Cut the newspaper colored eye shadow with the shape of a butterfly. Put the butterfly on a white sheet with a pencil and follow it around the edge so that butterfly of newspaper remains a large white board about 1/2-1 cm. Glue the two forms together with a drop of glue at the body of the butterfly.
These butterflies can be used as a gift tag or decoration boxes, even if small rings or small springs. You can make it waterproof and resistant to the paper by passing one or more coats of glue after you pass the color. Wait for the glue to dry well before continuing the work. Secret tip

Only for those who participate in the party.

fabric flowers

Material
pieces of fabric and lace or pearl buttons


Tools
scissors
needle and thread

Running
Cut a bit 'pieces of cloth of various sizes, not necessarily round, alternating colors in a harmonious way. Stack the pieces of cloth from the largest to smallest below above. Choose a button or a pearl (several small pearls are fine), pass a needle and thread, starting from below the flower, putting the lift button or the gem, returning below. Repeat at least three to four times, then secure the wire with one or more nodes below the flower.
These flowers can be used as a gift tag or decoration boxes, if small, even for rings or small springs.
If you want to do this project for children but do not want them to use the needle, replace with glue and wooden beads or buttons. Secret tip

Only for those who participate in the party.

PEARLS OF PAPER AND GLAZE

Material
paper
nail polish silver beads
expired (even plastic) cord

glue

Tools
scissors pencil

wooden skewer

Running
Cut two rectangular strips of white paper 20 cm long and 2.5 cm wide and a triangle at least 25 cm long and 3 cm wide.
Fold the triangle in half to longer and started to roll on a skewer of wood by fixing the edges with a bit 'of glue at the beginning and the end. Make sure the fold line remains at the center and roll up, so the pearl paper will be perfectly symmetrical. Roll
also the two rectangular strips of the triangular following the same procedure. Without
siflare pearls from the wooden skewer, move quickly glaze over the entire surface of the pearls. Let dry.
When the pearls will be dry, earcup from the skewer and put it in the rope, alternating with pearls old plastic or metal, preferably silver. You can also create smaller beads and thread to make bracelets in an elastic or rubber bands for hair or mount them on small metal to make earrings.
Secret tip
Only for those who participate in the party.

These projects are made available for personal use only.

0 comments:

Post a Comment